RFID tags have always posed a unique situation for engineers as they were a difficult technology to measure, check patterns, etc. Just checking to see it they work (especially in a production environment!) may be a real issue.
Our solution uses EMxpert and RFxpert, both proven technologies from EMSCAN.
frequency RFID…NFC it is all the same thing. 13.56 MHz is the center
frequency so the EMxpert is the tool that is relevant. You will need to
activate the RFID/NFC antenna to scan with the EMxpert. You can use a VNA
or signal generator to make the RFID antenna emit or use a reader to
excite the RFID antenna long enough for the EMxpert to scan it while it
Here is the Expert for your review: https://www.emscan.com/products/emc-emi-testing/
upper frequencies, RFID from 840MHz to 960MHz, we suggest the RFXpert
because this is no longer near-field.
It is a standard far-field application. This is a sweet spot for
Here is the RFXpert: https://www.emscan.com/products/antenna-testing/
Here are some EMSCAN Application Notes (click on App Note for Link)
ETS-Lindgren (RF Shielding Table-Top enclosures and RF shielding rooms)
Omega Shielding Fingerstock, gasketing, etc, see below for specifics
For information on any of these
products, please contact EIA,
For more information contact Frank
Electronic Instrument Associates-Central, Inc.